KetecEASClasssic06Button.jpg

www.AffordableAlternativesInc.com

Ketec Solosensor EAS System for clothing retailers
This is a hard tag only system. By following the rule-of- thumb "hard tags for soft goods & soft tags for hard goods," you see this system is best for clothing & soft goods retailers. It designed to for morning setup by a female owner or manager & begin to pay for itself the same afternoon.

Remove it from the box, attach it to the baseplate, position it about 12 to 14" from the jamb side of the exit & plug it into the nearest standard grounded 110V outlet. If you can not reach the outlet with the cord provided, do not use an extention cord. Please call a licensed electrician in your city or town to install a standard grounded 110-115V outlet about 6 to 8 feet from the jamb side of the door.

Click on the Solosensor below to view 2 installation diagrams.
Ketec Solosensor EAS System
KT-4.6MHzMon
This solosensor makes dollars & sense for all clothing retailers, even in remote areas. Easy to install & use this system will pay for itself in just a few months. It stands 60" (152.4cm) tall, 14" (35.6 cm) wide, & 1" (2.54 cm) deep, & weighs less than 11 pounds (4.8 kg). It will detect a full size tag up to four feet on either side, or a mini-tag up to three feet on either side. Since each monitor works independently, you would still be protected, if a single monitor was incapitated. Just erect traffic control for that zone & continue serving your customers.

<---Click on solosensor to view 2 installation diagrams.
hardtags_46_mini_lg.jpg Ketec Solosensor mini tags
EAS mini-tag-4.6MHz
Mini tag for use with Solosensor single pane EAS system for clothing & soft goods retailers.
Ketec Solosensor hard tags
EAS Tag-4.6MHz
Hard tags & pins for use with the Ketec Soloserve EAS System for clothing & soft goods retailers.
Detacher15.jpg Ketec EAS Chrome detacher
EAS-DT1
This chrome detacher is best secured behind your POS area. Unlike those detachers that you have seen at mass merchandisers, this one requires no force. Simply put the dome of the tag in the well of the detacher, push down easily to unlock the tag, and pull out the pin & garment. Then remove the pin from the garment. Drop the pin in a Folger's Coffee can for safe keeping. Do not replace them in the tag until you are protecting another garment.
Please click on the wooden mailbox below to send us an e-mail, and/or click on the wristrests below to order a Free ergonomic wristrest with your order for 32 rolls of stock processing labels, and/or click on the labeler to get the instructions for loading any XLPro labeler. You may also use our search box to locate a specific product


Search